Single Shaft Magnetic Particle Brake with Fan Cooling PFB

Sunrise Single Shaft Magnetic Particle Brake with Fan Cooling PFB

PFB Attention for using magnetic particle powder brake

1, Install it with correct mounting method (make high-speed rotation side as the input side) to use themagnetic particle powder clutch. If the mechanical structure of output and input shafts have to be installation reversely, make sure to use the under 1000R/MIN. If the output shaft and input shaft be installed reversely, which will make the machine idle for a long time,  the magnetic powder clutch will greatly shorten the life by mixing magnetic powder. 

2, Note the moisture. If the magnetic is damp, then performance will become unstable, so be careful do not to let the oil or water get into the housing. Especially when installed in the gear box, oil penetrated the internal branch of the housing through the shaft, so please seal it with film completely.

3, Note the surface temperature. Caused by continuous operation, the maximum temperature of the surface is below 90 degree when running more, than the value and durability will be greatly reduced. Make sure to limit the temperature will not above90 degree, make sure to keep the use of sliding within allowed work range.

Magneticparticle powder brake data

MODEL			PFB-025	PFB-050	PFB-100	PFB-200
Rated torque (N.m)			2.5(25)	5.0(50)	10(100)	20(200)
Current (A)			1.24	2.15	2.40	2.70
Power (W)			29.8	51.5	57.6	64.8
Weight (Kg)			10	15.5	37	59
Area of heat release(cm)2			350	350	350	350
Maximum speed (r/min)			1800	1800	1800	1800
NO. of hour set (s)			0.12	0.13	0.25	0.37
Exterior dimension	L1		196	247	333	372
	L2		132	156	233	263
	L3		43	55	65	69
	L4		17	30	28	30
	L5		64	91	100	109
	A		M6 Deep 10	M6 Deep 10	M10 Deep 15	M10 Deep 15
	R	Path way	M5	M6	M10	M10
		Deepth	10	12	20	20
		d(h7)	20	25	30	35
	D1		184	219	278	327
	D2		160	196	258	302
	D3		78	100	140	150
	D4(g7)		55	74	100	110
	D5		150	172	254	254
	Q(inch)		1/8	1/4	3/8	3/8
	W(p7)		5	7	7	10
	T(0-0.2)		22	28	33	38.5

Magneticparticle powder brake application

*Textile machinery: fiber twisters, treatment machines, weaving machines
* Metal fishing systems: extruders, wire stretchers, presses, welders, steel wire retractors, cutters, pipe makers, wire winding machines
*Machine tool systems: lathes,
* Millers, steel extruders, CNC lathes, specialized machinery
* Transportation equipment: hoists, feeders, conveyors, rollers, winders
* Paper- making systems: bag-making machines, box-making machines, slitters, book-making machinery, cutters, copy paper machines

Magneticparticle powder brake FAQ

1.    When can I get the quotation?

We usually quoted within 24 hours after receiving your inquiry. If you are very urgent to get the price, please call us or tell us in your email, so that we can regard your inquiry priority.

2.    How should I place the order?

Please let us know the model number based on our specs for powder clutch, powder brake, air clutch, air brake, electromagnetic clutch, electromagnetic brake and safety chucks. For air shaft and roller, please show us your drawing, or let us know your request, and then we will provide you drawing for confirmation.

3.    What’s your MOQ basis?

Normally, we don’t have MOQ request, except the rollers.

4.    What about the lead time for production?

Honestly, it depends on the order quantity and the type of our products. For powder clutch, powder brake, tension controller, load cell and edge position controller which is about 3-5 days. For safety chucks, air shaft and roller which need about 15-30days.

5.    What is the term of delivery?

We can arrange with EXW, FOB, CIF…etc. You can choose the most convenient one or cost-effective way.